购物车
  • 全部删除
  • TargetMol
    您的购物车当前为空

Ciliobrevin A

Rating icon 很棒
产品编号 T3156Cas号 302803-72-1
别名 HPI-4, Hedgehog Pathway Inhibitor 4

Ciliobrevin A (HPI-4) 是Hedgehog(Hh) 信号通路抑制剂,平均抑制浓度 (IC50) 值小于 10 μM。

Ciliobrevin A
TargetMol

为众多的药物研发团队赋能,

让新药发现更简单!

Ciliobrevin A

Rating icon 很棒
纯度: 99.22%
产品编号 T3156 别名 HPI-4, Hedgehog Pathway Inhibitor 4Cas号 302803-72-1

Ciliobrevin A (HPI-4) 是Hedgehog(Hh) 信号通路抑制剂,平均抑制浓度 (IC50) 值小于 10 μM。

规格价格库存数量
2 mg¥ 279现货
5 mg¥ 438现货
10 mg¥ 591现货
25 mg¥ 1,330现货
50 mg¥ 2,480现货
100 mg¥ 3,970现货
200 mg¥ 5,680现货
500 mg¥ 8,690现货
1 mL x 10 mM (in DMSO)¥ 493现货
大包装 & 定制
加入购物车
实验操作小课堂
查看更多

"Ciliobrevin A"的相关化合物库

选择批次:
纯度:99.22%
联系我们获取更多批次信息
TargetMol 的所有产品仅用作科学研究或药证申报,不能被用于人体,我们不向个人提供产品和服务。请您遵守承诺用途,不得违反法律法规规定用于任何其他用途。

产品介绍

生物活性
产品描述
Ciliobrevin A (HPI-4) is an inhibitor of hedgehog signaling pathway with an IC50 <10 μM.
靶点活性
Hedgehog:>10 μM.
体外活性
经Ciliobrevin A培养的Shh-EGFPFLAG-Gli2细胞表现出原生纤毛的缩短,并且在一大部分经Ciliobrevin A处理的细胞中,该细胞器缺失。Ciliobrevin A扰乱Shh-LIGHT2FLAG-Gli1细胞中原生纤毛的形成,并促进FLAG-Gli1在此细胞器远端积累。Ciliobrevin A显著抑制这些神经前体细胞的增殖,通过组蛋白H3磷酸化水平(pH3)测量,并减少细胞内cyclin D1蛋白以及Gli1、Gli2和N-Myc转录本的水平。Ciliobrevin A能够阻止表达SmoM2的CGNPs的增殖,并应对缺乏Su(fu)功能的CGNPs同样有效,而Smo抑制剂Cyclopamine对这两种致癌损伤均无效。Ciliobrevin A阻止了Shh刺激下FLAG-Gli2全长/抑制剂比率的增加,但HPI-2和HPI-3无显著影响。Ciliobrevin A增加了纤毛中FLAG-Gli2的水平,这种增加与其对总FLAG-Gli2水平的影响不成比例[1]。
激酶实验
Smo-binding assays are conducted with BODIPY-cyclopamine and Smo-overexpressing HEK 293T cells, using a CMVpromoter-based SV40 origin-containing expression construct for Smo-Myc3 (murine Smo containing three consecutive Myc epitopes at the C terminus). HEK 293T cells are seeded into eight-well chambered coverslips (80,000 cells/well) and cultured in DMEM containing 10% FBS, 100 U/mL penicillin, and 0.1 mg/mL streptomycin. The cells are cultured until they reached 55 to 65% confluency (14-18 h), after which they are transfected with the Smo-Myc3 expression construct and Transit-LT1. Twenty-four hours after transfection, the cells are washed with PBS and cultured in DMEM containing 0.5% FBS, 5 nM BODIPY-cyclopamine, and various concentrations of either cyclopamine or individual HPIs. After 30 min, 10 μM Hoescht 33342 is added to each well, and the HPIs are incubated with the cells for an additional 30 min. The cells are then washed two times with PBS buffer, once with phenol red-free DMEM containing 0.5% FBS, and immediately imaged using a DMI6000B compound microscope. Images are background-substracted using ImageJ software with a rolling ball size of 75 pixels, and BODIPY-cyclopamine intensity is then determined using Metamorph software. Circular regions with a diameter of 300 pixels are placed over regions containing uniformly confluent cells, and the pixel intensities of approximately 20 regions from four independent images is used to determine the average BODIPY-cyclopamine levels for each experimental condition[1].
细胞实验
Using MTS-8 assay to measure cell proliferation and the toxicity of this drug. 2000 cells were plated in 96-well plates per well. HPI-4 was added to cells at concentrations of 0, 5 and 10 μM in 100 μl DMEM/F12 with 10% FBS and incubated for 0, 1, 3, 6 and 9 days. Then, 10 μl MST-8 was added to the media in each well and incubated in an environment without light for 90 min. The absorbance value was measured using an enzyme microplate reader at 450 nm wavelength. The relative viability of cells was expressed by OD value.(Only for Reference)
别名HPI-4, Hedgehog Pathway Inhibitor 4
化学信息
分子量358.18
分子式C17H9Cl2N3O2
CAS No.302803-72-1
SmilesClc1ccc(C(=O)C(\C#N)=C2\NC(=O)c3ccccc3N2)c(Cl)c1
密度1.471 g/cm3 (Predicted)
储存&溶解度
存储Powder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice.
溶解度信息
DMSO: 65 mg/mL (181.47 mM), Sonication is recommended.
Ethanol: 1 mg/mL (2.79 mM)
溶液配制表
1mg5mg10mg50mg
1 mM2.7919 mL13.9595 mL27.9189 mL139.5946 mL
1mg5mg10mg50mg
5 mM0.5584 mL2.7919 mL5.5838 mL27.9189 mL
10 mM0.2792 mL1.3959 mL2.7919 mL13.9595 mL
20 mM0.1396 mL0.6980 mL1.3959 mL6.9797 mL
50 mM0.0558 mL0.2792 mL0.5584 mL2.7919 mL
100 mM0.0279 mL0.1396 mL0.2792 mL1.3959 mL

计算器

  • 摩尔浓度 计算器
  • 稀释 计算器
  • 配液 计算器
  • 分子量 计算器

体内实验配液计算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
TargetMol | Animal experiments比如您的给药剂量是 10 mg/kg ,每只动物体重 20 g ,给药体积 100 μLTargetMol | Animal experiments 一共给药动物 10 只 ,您使用的配方为 5% TargetMol | reagent DMSO+ 30%PEG300+ 5%Tween 80 + 60% ddH2O. 那么您的工作液浓度为 2 mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法:50μLDMSOTargetMol | reagent 母液,添加 300 μLPEG300TargetMol | reagent 混匀澄清,再加 50μLTween 80, 混匀澄清,再加 600μLddH2OTargetMol | reagent 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

1 请输入动物实验的基本信息
mg/kg
g
μL
2 请输入动物体内配方组成,不同的产品配方组成不同,如有配方需求,可先联系我们提供正确的体内配方。
% DMSO
%
%Tween 80
%ddH2O

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多

关键词

评论列表

4个月前
5.0
Rating icon 很棒

评论内容

Related Tags: buy Ciliobrevin A | purchase Ciliobrevin A | Ciliobrevin A cost | order Ciliobrevin A | Ciliobrevin A chemical structure | Ciliobrevin A in vitro | Ciliobrevin A formula | Ciliobrevin A molecular weight